How to Replace the Blade on Andis Clippers (Cordless & Professional Models Guide)

Blade Replacement even an option?

Ever feel like your Andis clipper isn't giving a clean cut? Or tugging or nicking?That's because the blades need replacement or proper alignment. Your sign to learn how to replace blade on Andis clippers.

Blade replacement is important for fresher and clean cuts, also the best Andis clipper gliding smoothly over the skin. Old blades get dull overtime, causing the motor to work harder which in long term decreases the lifespan of the best Andis clipper. Learning how to replace blade on Andis clippers isn't just about performance, it's also about hygiene. Are Andis clippers good? Here’s your quick guide.

Sanitize & Style

You, being a clean freak, must be protecting your skin from dust, unwashed hands or used soaps, but using a clipper that hasn't been cleaned in ages, and still wondering why you get the skin bumps and redness. Blade hygiene is the reason. Sharp and clean Andis clipper blades ain't just for hygiene but also important for smooth performance. Dull or dirty blades, not only have hairs trapped but bacteria and dead skin.

 

At the same time clean, sharp best Andis clipper blades give you clean, crisp lines, smooth and even fade without hair pulling. They also don't overworks the motor and keeps it cool, so it lasts longer. Also for cordless Andis clippers, reduced strain means the battery won’t drain as fast. With cleaning, oiling is a crucial part to decrease wear and tear or friction. That’s why knowing how to replace blade on Andis clippers the right way makes a huge difference. How to adjust Andis trimmer blades for smoother, sharper performance? Here’s to learning it.

 

Signs not to ignore!

1. Tugging or Pulling hair

2. Uneven fades or Leaving patches

3. Getting hotter than usual

4. Rusty blades

5. Louder

6. Skin irritation

7. Old blades

Corded vs. Cordless Andis Clipper

• Power

Corded offers consistent power without fluctuation. Cordless Andis clipper, may give a power dip as battery depletes.

• Battery

Corded, no battery needed, just plug in and use. Cordless Andis clipper, runs on rechargeable battery and requires charging between uses.

• Design

Corded are slightly bulkier due to motor and cord. Cordless Andis clipper, are lightweight and have ergonomic design.

• Convenience

Corded, only limited due to cord but gives continuous performance. Cordless Andis clipper, gives full freedom as they're portable.

• Price

Corded, easier on the pocket and lower long term maintenance. Cordless Andis clipper, are a little on the pricier side depending on battery and charging.

Bestselling Andis Clipper Models

1. Cordless Adjustable Blade Clipper – Supra Li

• Lithium-Ion Battery

• Lightweight Design

• Cord/Cordless Operation

2. Cordless Master Clipper

• Cord/Cordless Operation

• Powerful Rotary Motor

• Lithium-Ion Battery

3. Fade Master® Adjustable Blade Clipper

• High-Speed Magnetic Motor

• Heavy-Duty Performance

• One-Hand Operation

4. Cordless Envy Li Adjustable Blade Clipper

• Magnetic Motor

• Ergonomic Design

• Cordless Convenience

The Kit

• Replacement blade

• Screwdriver

• Cleaning brush

• Lubricating oil

Steps, How to Replace Blades on Andis Clippers

Step 1: Unplug or turn off the clipper

Safety first. Before unscrewing, power off your best Andis clipper. For cordless clippers, long press the power button until it's shut. Do you need to oil your Andis foil shaver? Here’s a detailed cleaning & maintenance guide.

 

Step 2: Remove the old blade

Time to replace the blades, unscrew the screws on the back or side of the Andis clipper using the screwdriver. Gently unscrew them without putting force and safely store them. As the Andis clipper body is unscrewed, gently lift the blade set off the motor housing. This is where most people hesitate, but once you know how to replace blade on Andis clippers, it gets easier every time

 

Step 3: Clean the blade area before installation

Before jumping directly to the blades, grab the cleaning brush and clean the area where blades are stored. Brush away any hair, debris or dirt. You can even blow air on it for that perfectly neatly cleaned body.

 

Step 4: Align and attach the new blade

The blade set should be placed onto the front of your Andis clipper body and make sure the moving blade is placed directly below the stationary blade, making sure their teeth are even.

Hold the blades in place and insert the screws in the holes. Don't tighten them up yet.

If your model includes a taper lever, shift it up and down to see the blade movement and align them perfectly. Once blades are aligned then tighten the screws.

 

Step 5: Test for performance

Now, turn your Andis clipper on and listen to it. If it's running quietly and smoothly, it's good to go. Or else repeat the steps thoroughly and check the alignment again.

 

Step 6: Oil the blades

After turning on the best Andis clipper add a few drops of oil on the blades. Keep the Andis clipper on so it spreads evenly. This helps reduce friction and extends their life. Reassembling Andis clipper blades? Here's a complete step-by-step guide.

 

Conclusion

Now, if your best Andis clipper starts tugging hair or gives skin infection, yk what to do. Dull blades ain't no good. They ruin the peace of mind and as well the battery of the machine. Blade replacement isn't just hygiene, it's maintenance and ensuring your machine runs longer and you don't have to empty your bank again and again and for that learning how to replace blade on Andis clippers is important. How to properly sanitize & disinfect barber tools and equipment, here’s to learning how to keep tools hygienic.

 

FAQ’s

Q1. When to replace an Andis clipper blade?
The blade should be replaced on a regular basis. Depending on grooming volume, change the blade every 30 to 60 days.

Q2. Why did my Andis clippers stop working?
A blade clogged with fur or lacking lubrication will be unable to properly function. That’s why knowing how to replace blade on Andis clippers helps you avoid this.

Q3. Can I use any blade on my cordless Andis clippers?
Nope! Use only blades made for your specific cordless Andis clippers to ensure proper fit and performance.

Q4. Can I replace the blade myself or should I visit a pro?
Following this guide on how to replace blade on Andis clippers you can totally wing it yourself.

Q5. Will replacing the blade fix pulling or snagging?
Yes, most of the time. Dull blades are the main reason best Andis clippers pull hair.